ORiNG DGS-7084GCP-AIO_S SERIES User Manual page 24

LLDP Neighbor Information
This page provides a status overview for all LLDP neighbors. The displayed table contains a
row for each port on which an LLDP neighbor is detected. The columns hold the following
information:
Label
Local Port
Chassis ID
Remote Port ID
System Name
Port Description
System Capabilites
ORing Industrial Networking Corp
DGS-7084GCP-AIO_S SERIES User's Manual
Rx only The switch will not send out LLDP information, but LLDP
information from neighbor units is analyzed.
Tx only The switch will drop LLDP information received from
neighbors, but will send out LLDP information.
Disabled The switch will not send out LLDP information, and will
drop LLDP information received from neighbors.
Enabled The switch will send out LLDP information, and will
analyze LLDP information received from neighbors.
Description
The port on which the LLDP frame was received.
The Chassis ID is the identification of the neighbor's LLDP
frames.
The Remote Port ID is the identification of the neighbor port.
System Name is the name advertised by the neighbor unit.
Port Description is the port description advertised by the neighbor
unit.
System Capabilities describes the neighbor unit's capabilities.
The possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
23