ORiNG DGS-7084GCP-AIO_S SERIES User Manual page 89

Industrial managed gigabit bypass ethernet switch
Table of Contents

Advertisement

IP TTL
IP Fragment
IP Option
SIP Filter
SIP Address
SIP Mask
DIP Filter
ORing Industrial Networking Corp
DGS-7084GCP-AIO_S SERIES User's Manual
Specify the Time-to-Live settings for this ACE.
zero: IPv4 frames with a Time-to-Live field greater than zero must not
be able to match this entry.
non-zero: IPv4 frames with a Time-to-Live field greater than zero
must be able to match this entry.
Any: Any value is allowed ("don't-care").
Specify the fragment offset settings for this ACE. This involves the
settings for the More Fragments (MF) bit and the Fragment Offset
(FRAG OFFSET) field for an IPv4 frame.
No: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must not be able to match this entry.
Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field
is greater than zero must be able to match this entry.
Any: Any value is allowed ("don't-care").
Specify the options flag setting for this ACE.
No: IPv4 frames where the options flag is set must not be able to
match this entry.
Yes: IPv4 frames where the options flag is set must be able to match
this entry.
Any: Any value is allowed ("don't-care").
Specify the source IP filter for this ACE.
Any: No source IP filter is specified. (Source IP filter is "don't-care".)
Host: Source IP filter is set to Host. Specify the source IP address in
the SIP Address field that appears.
Network: Source IP filter is set to Network. Specify the source IP
address and source IP mask in the SIP Address and SIP Mask fields
that appear.
When "Host" or "Network" is selected for the source IP filter, you can
enter a specific SIP address in dotted decimal notation.
When "Network" is selected for the source IP filter, you can enter a
specific SIP mask in dotted decimal notation.
Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified. (Destination IP filter is
"don't-care".)
Host: Destination IP filter is set to Host. Specify the destination IP
address in the DIP Address field that appears.
Network: Destination IP filter is set to Network. Specify the
88

Advertisement

Table of Contents
loading

Table of Contents