ORiNG DGS-7084GCP-AIO_S SERIES User Manual page 34

4.1.4.3.2 LACP Port Configuration
This page allows the user to inspect the current LACP port configurations, and possibly
change them as well.
Label
Port
LACP Enabled
Key
Role
ORing Industrial Networking Corp
DGS-7084GCP-AIO_S SERIES User's Manual
Description
Indicates the group ID for the settings contained in the same row.
Group ID "Normal" indicates there is no aggregation. Only one
group ID is valid per port.
Each switch port is listed for each group ID. Select a radio button
to include a port in an aggregation, or clear the radio button to
remove the port from the aggregation. By default, no ports belong
to any aggregation group. Only full duplex ports can join an
aggregation and ports must be in the same speed in each group.
The Key value incurred by the port, range 1-65535. The Auto
setting will set the key as appropriate by the physical link speed,
10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific setting, a
user-defined value can be entered. Ports with the same Key value
can participate in the same aggregation group, while ports with
different keys cannot.
The Role shows the LACP activity status. The Active will transmit
33