Labrie MINIMAX Maintenance Manual page 24

16 Safety
Putting the Tailgate Safety Prop Back in Place
To put the tailgate safety prop back in its home position:
Start the engine.
1.
Turn on the pump.
2.
Raise the tailgate by about 3 feet.
3.
Raise the tailgate safety prop.
4.
Figure 2-5 Raising the tailgate safety prop
Release your grip on the safety prop to set it in its home position.
5.
Figure 2-6 Setting the safety prop in its home position
With the T
6.
close the tailgate.
The switch should turn from green to blue, indicating that the tailgate is completely closed.
D switch on the multiplexed control module (see Figure 3-18), fully
AILGATE OWN