Labrie MINIMAX Maintenance Manual page 148

140 Multiplexing
For example, if you want to check all functions that are found in the cab, choose module #10. For all
functions that pertain to the chassis, choose module #20, etc.
To choose a particular module, use the up/down arrows to select it and press "OK".
: Pressing "OK" can be done two ways: either press the far right button or the "OK" button.
N
OTE
Press "Esc" to return to the preceding page.
Figure 9-9 Module I/O Status page
Input Status
The Input Status page is accessible from the Module I/O Status page. After selecting the desired
module and pressing "OK", the Input Status page of the selected module is displayed (see Figure
9-10).
Figure 9-10 Input Status page