Labrie MINIMAX Maintenance Manual page 112

104 Electrical System
Circuit breakers
There is a button on the circuit breaker of the relay box located inside the cab. Pushing this button
resets the breakers.
Important Never hold down the reset button when the reset operation fails. This may result in severe
electrical damage. Report this problem to your supervisor and maintenance department.
: Consult the OEM manual for information on equipment not manufactured by Labrie
N
OTE
Enviroquip Group.
The following table provides a description of the circuit breakers located in the control box inside the
truck cab.
Monitor (W6)
Cab fan (W7)
Scale Air-Weigh System power & acc. (W8)
Electronic controller (W9)
Function Ampere Circuit Number
7.5 141
15 135
10 161
10 168