Labrie MINIMAX Maintenance Manual page 146

138 Multiplexing
To exit this page and return to the Cart Counter page, press "Esc". To choose a section from the main
menu, highlight the desired section using the up/down arrows and press the "OK" button.
Multicycle
On the multiplexed system display monitor (see Figure 9-1), select
corresponding button at the bottom left corner of the display monitor. From the displayed menu,
choose the option
and press OK. The multi-cycle settings can be changed from two to eight cycles. Choose the desired
number of cycles and press OK. It could not be easier!
Figure 9-6 Display monitor
: The packer multi-cycle function has been preset at the factory to carry out three cycles.
N
OTE
When the
MULTI
packer will move according to the default number of cycles (that is 3) or to the number of cycles you
chose (up to 8 cycles).
Figure 9-7 Multiplexed switch panel
SELECT THE NUMBER OF CYCLES
- switch on the multiplexed switch panel is on and the packer is activated, the
CYCLE
Multi-cycle switch
Pump switch
MAIN MENU
. If need be, use the arrow to choose that option
Start cycle button
by pressing the