Labrie MINIMAX Maintenance Manual page 150

142 Multiplexing
The rectangles found in this page are used to check the status of different outputs.
: Each rectangle is numbered and relates to a specified function of the truck. However, for a
N
OTE
given number, the related function may vary from truck to truck.
Table 4 Colored rectangles
Press "Esc" to return to the preceding page.
Press the "Force" button to display the Force page.
Force
The Force page is accessible from the Output Status page. Just press the corresponding button to
access the Force page.
But before the Force page is displayed, a warning message appears on the screen (see Figure 9-12).
Figure 9-12 Warning message
This message stays there for 15 seconds. Then an "OK" prompt appears on the lower right-end
corner of the screen.
Rectangles
Function Status
(outputs)
Blue Inactive
Green Active
Red Closed short-circuit
Yellow Open circuit