Configurations - Curtis enAble 40 Manual

1 — OVERVIEW
2
✔ Three flexible Multi-Function input pins for advanced seat
actuator inhibits, speed limiting, and swivel chair functions
usually found only on high-end systems.
✔ Powerbase software is upgradable in the field or in the factory.
✔ Onboard or offboard charging up to 8 amps accommodates
high capacity batteries.
✔ Compatible with the Curtis 1313 handheld programmer and
1314 PC Programming Station.
User handcontrol:
✔ Stylish and ergonomic design.
✔ Intuitive at-a-glance icons on LCD display with backlight,
viewable in any lighting.
✔ Four keypad configurations that match the application.
✔ Up to nine programmable speed modes are quickly and easily
accessible while driving.
✔ Industry standard 3-pin XLR charger/programmer port.
✔ Key-lock function to lock out unwanted drivers.
✔ Rugged and flexible communications cable.
✔ Field replaceable joystick and communications cable.
Attendant control:
✔ Easily connected to the system, with plug-in-line autoconnect
feature.
✔ Programmable takeover control.
✔ Field-replaceable joystick and communications cable.
The enAble 40 system introduces a number of unique features. Here are some
®
brief descriptions.
Configurations
The powerbase stores four "configurations" — which are complete setups with
data settings for every parameter. This means the OEM can have four configu-
rations in one product—in effect, four products in one. The dealer can stock
just one "4-in-1" model and use the Configuration parameter to select the most
appropriate data block for each chair and each customer.
Each configuration is a complete setup, including two profiles for each.
This means the 1740 actually holds eight different ready-made setups.
Curtis enAble 40 Manual,
®
Rev. E