Multi-Function Input 1 Parameters - Curtis enAble 40 Manual

5 — PROGRAMMABLE PARAMETERS:
PARAMETER
Off / InbL / InbH / Spd
Charger Inhibit
Halt Act 1 Dir-
Halt Act 1 Dir+
Halt Act 2 Dir-
Halt Act 2 Dir+
Speed Limit Low
Speed Limit High
30

Multi-Function Input 1 Parameters

The powerbase has three
very flexible array of seat adjustment and drive speed limiting functions.
The speed limits imposed by the Multi-Function inputs act like speed
modes; they cause an interpolation between each of the min and max parameter
pairs in the active profile (Profile 1 or 2). Note that the final speed limit of the
chair is always the lowest of all the applicable limits.
Each of the three Multi-Function inputs has its own programming menu.
Multi-Function Input 1
limit, with either a high (B+) or a low (B-) input. It can also be used to provide
a variable speed limit based on the position of a potentiometer, or to accom-
modate a high-side or low-side onboard charger. Multi-Function Input 1 is at
Pin 5 on the 14-pin connector; see Figure 6, page 9.
MULTI-FUNCTION INPUT 1 MENU
RANGE
0–3 0 = Multi-Function Input 1 ignored.
1 = Inhibit drive or actuators when input is low.
2 = Inhibit drive or actuators when input is high.
3 = Speed limit varies with input voltage.
On/Off Enables Input 1 to be used with an on-board charger. The charger
pulls the inhibit active during charging, which will inhibit drive, light
the charger and battery icons in the handcontrol display, and engage
the EM brake.
On/Off Actuator 1 will be halted in the negative direction.
On/Off Actuator 1 will be halted in the positive direction.
On/Off Actuator 2 will be halted in the negative direction.
On/Off Actuator 2 will be halted in the positive direction.
0–100 % Sets the speed limit when the input is low or the potentiometer
wiper is fully to B-.
0–100 % Sets the speed limit when the input is high or the potentiometer
wiper is at 100K to B-.
, which can be used to create a
Multi-Function Inputs
can be used to inhibit the actuators or to set a speed
DESCRIPTION
Curtis enAble 40 Manual,
®
Rev. E