Curtis enAble 40 Manual page 55

HANDCONTROL LCD DISPLAY
+
!
+
!
+
+
+
+
+
+
+
+
!
The numerical icon showing the
present Speed Mode flashes.
Curtis enAble 40 Manual,
®
Table 1: HANDCONTROL INDICATORS, cont'd
FAULT/WARNING
Undervoltage Warning
Overvoltage Warning.
Controller Over/Undertemperature
Warning.
Drive Thermal Warning.
Open Motor Fault.
Left Indicator Fault.
Right Indicator Fault.
Hazard Lights Fault.
Running Lights Fault.
Speed Limit Warning.
Rev. E
8 — DIAGNOSTICS & TROUBLESHOOTING
REMEDY
1. Recharge battery.
2. Replace old battery.
3. If this is happening frequently, replace charger.
4. Check charger port on handcontrol; replace if
damaged.
1. Wait for voltage to come down.
2. Replace old battery.
3. Check charger; replace if faulty.
1. If too hot, wait for controller to cool.
2. If too cold, drive chair in limited current mode
until controller warms up.
1. Wait for motor to cool.
1. Check wiring.
2. Replace motor.
3. Replace powerbase.
1. Press Left Indicator button.
2. Replace bulb.
3. If fault continues, check wiring.
1. Press Right Indicator button.
2. Replace bulb.
3. If fault continues, check wiring.
1. Press Right or Left Indicator button.
2. Replace bulb.
3. If fault continues, check wiring.
1. Press Running Lights button.
2. Replace bulb.
3. If fault continues, check wiring.
1. Return seat to normal or upright position.
2. If fault continues, check all limit switches
and wiring.
49