Sound & Display Parameters; Handcontrol Inhibit Parameters; Sound & Display - Curtis enAble 40 Manual

PARAMETER
Rev Beep
Command Beep
Error Beep
Backlight Day
Backlight Night
PARAMETER
Halt Act 1 Dir-
Halt Act 1 Dir+
Halt Act 2 Dir-
Halt Act 2 Dir+
Curtis enAble 40 Manual,
®
5 — PROGRAMMABLE PARAMETERS:
SOUND & DISPLAY MENU
RANGE
On/Off Provides a backup alarm when the chair is in reverse.
On/Off Provides a short beep each time a button is pressed.
On/Off Provides a beep when errors are present.
0–100 % Sets the brightness of the LCD display backlight when the running
lights are off.
0–100 % Sets the brightness of the LCD display backlight when the running
lights are on.
The parameters in the
to remain active while the charger is plugged into the handcontrol.
The chair's drive functions are disabled automatically when the charge
inhibit input is pulled to ground. The Handcontrol Inhibit parameters allow
you to choose whether the actuator functions will also be disabled.
One or both actuators can be halted in either, both, or neither direction.
Setting a Halt parameter to Off allows that specific movement (such as tilt
forward) during charging.
HANDCONTROL INHIBIT MENU
RANGE
On/Off Actuator 1 will be halted in the negative direction.
On/Off Actuator 1 will be halted in the positive direction.
On/Off Actuator 2 will be halted in the negative direction.
On/Off Actuator 2 will be halted in the positive direction.
Rev. E
Sound & Display and Charger Inhibit Parameters
DESCRIPTION
menu allow the actuator functions
Handcontrol Inhibit
DESCRIPTION
27