Curtis enAble 40 Manual page 64

APPENDIX C: PROGRAMMING DEVICES
C-1 A-6
PROGRAMMING DEVICES
Curtis programmers provide programming, diagnostic, and test capabilities for
the enAble 40 system. The programmer plugs into the 5-pin connector on the
®
user handcontrol; power is supplied by the powerbase. When the programmer
powers up, it gathers system information from the powerbase.
Two types of programming devices are available: the 1314 PC Program-
ming Station and the 1313 handheld programmer. The Programming Station
has the advantage of a large, easily read screen; on the other hand, the hand-
held programmer (with its 45×60mm screen) has the advantage of being more
portable and hence convenient for making adjustments in the field.
Both programmers are available in User, Service, Dealer, and OEM ver-
sions. Each programmer can perform the actions available at its own level and
the levels below that—a User-access programmer can operate at only the User
level, whereas an OEM programmer has full access.
PC PROGRAMMING STATION (1314)
The Programming Station is an MS-Windows 32-bit application that runs on
a standard Windows PC. Instructions for using the Programming Station are
included with the software.
HANDHELD PROGRAMMER (1313)
The 1313 handheld programmer is functionally equivalent to the PC Pro-
gramming Station; operating instructions are provided in the 1313 manual.
This programmer replaces the 1307 and 1311, earlier models with fewer functions.
PROGRAMMER FUNCTIONS
Programmer functions include:
Parameter adjustment
— provides access to the individual programmable pa-
rameters.
Monitoring
— presents real-time values during vehicle operation; these include
all inputs and outputs.
Diagnostics and troubleshooting
means to clear the fault history file.
Programming — allows you to save/restore custom parameter settings files and
also to update the system software (not available on the 1307 or 1311).
Favorites — allows you to create shortcuts to your frequently-used adjustable
parameters and monitor variables (not available on the 1307 or 1311).
APPENDIX C
— presents diagnostic information, and also a
Curtis enAble 40 Manual,
®
Rev. E