Lcd Display - Curtis enAble 40 Manual

3 — USER HANDCONTROL
Battery Discharge Indicator
(BDI)
Running
Lights
L Turn
Indicator
Lights
Charging
Plug
Fig. 9
LCD display on the handcontrol.
16

LCD DISPLAY

The LCD on the handcontrol briefly displays all of the system's icons, as shown
in Figure 9, during its self-test routine on startup.
Actuator
Key
Lock
Joystick
Legrest
Powerbase
Actuators
Two indicators are lit when the chair is in drive: the BDI icon (which uses
its seven bars to represent the level of charge) and the Speed Mode indicator
(which displays the active Speed Mode: 1 through 9).
Some indicators (Key Lock, Brake, Fault, Warning, Powerbase, and
Temperature Warning) are lit only when when the system detects a condition
that triggers them.
Some indicators (Charging Plug, Running Lights) are lit steadily when
the corresponding function is active. When they are flashing, they indicate the
location of a problem; the Fault or Warning or Temperature Warning will be
lit as appropriate along with the flashing icon. (See Table 1, page 48.)
The Turn Indicator icons flash in synchronicity with the actual turn in-
dicators. If there is a problem, the Warning icon will light and the Turn Signal
indicator will flash at twice its normal rate.
The Attendant Control icon is lit continuously when the chair is under
attendant control.
Seat
Brake
Seatback
Actuator
Temperature
Warning
Speed
Drive
Mode
Motor
Curtis enAble
Fault
Warning
!
Attendant
R Turn
Control
Indicator
Lights
40 Manual,
®
Rev. E