Lights; Motor Controller; Motors & Brakes; Battery - Curtis enAble 40 Manual

6 — MONITOR MENU
6
36
Through its Monitor menu, the programmer provides access to real-time data
during chair operation. The Monitor menu has six submenus, which follow the
Active Config parameter at the top of the menu:
DISPLAY
ITEM RANGE
Active Config
H A ND C O N TRO L S • • •
Drive Command -100 – +100 %
Turn Command
-100 – +100 %
Speed Mode
1 – 9
Speed Command 0 – 100 %
Horn Button On/Off
Mode Button
On/Off
Aux 1 Button On/Off
Aux 2 Button On/Off
Left Turn Button
On/Off
Right Turn Button On/Off
Hazards Button
On/Off
Running Lights Button
On/Off
Handcontrol Inhibit On/Off
S EAT • • •
Actuator 1 Voltage
-37.5 – +37.5 V
Actuator 2 Voltage
-37.5 – +37.5 V
Actuator Current -12.0 – +12.0 A

MONITOR MENU

MONITOR MENU
DESCRIPTION
1–4 Configuration that is currently selected.
Requested normalized (to 100%) Y-axis
throttle request incorporating the deadbands.
Requested normalized (to 100%) X-axis
throttle request incorporating the deadbands.
Speed Mode setting.
Speed Limit value in effect.
Status of the Horn button.
Status of the Mode button.
Status of the Aux 1 button ( ).
Status of the Aux 2 button ( ).
Status of the Left Turn button.
Status of the Right Turn button.
Status of the Hazards button.
Status of the Running Lights button.
Status of the Handcontrol Inhibit input.
Voltage applied to Actuator Motor 1.
Voltage applied to Actuator Motor 2.
Current through the actuator motors.
Curtis enAble
MONITOR MENU
—Active Config
—Handcontrol
—Seat

—Lights

—Motor Controller

—Motors & Brakes

—Battery

40 Manual,
®
Rev. E