Speed Mode Parameters; Speed Mode - Curtis enAble 40 Manual

☞
PARAMETER
Number of Modes
Speed 1
Speed 2
Speed 3
Speed 4
Speed 5
Speed 6
Speed 7
Speed 8
Speed 9
Attendant Speed 1
Attendant Speed 2
Curtis enAble 40 Manual,
®
The menu allows the therapist, dealer, or OEM to set the number

Speed Mode

of modes that can be selected by the user and by the attendant, and the speed
limit of each mode.
It is important to note that the speed limit setting works like a speed
pot. It adjusts the drive and turn speed and response as a linear interpolation
from the min and max parameters set in the profile (for parameters set in the
profile, see the Drive and Steer menus, pages 21 and 22). Speed, acceleration,
and deceleration are all affected by the Speed Mode.
Example:
Profile 1 is active, and has the following parameters:
Fwd Max Speed = 100%
Fwd Min Speed = 20%
Turn Accel High Speed = 80%
Turn Accel Low Speed = 60%
The selected Speed Mode is set at 50%.
The resultant drive and steer conditions would therefore be:
Forward Speed = (100% - 20%) * 50% + 20% = 60%
Turn Acceleration = (80% - 60%) * 50% + 60% = 70%
SPEED MODE MENU
RANGE
2–9 Number of speed modes that can be accessed by the user.
0–100 % Speed limit setting for Speed Mode 1.
0–100 % Speed limit setting for Speed Mode 2.
0–100 % Speed limit setting for Speed Mode 3.
0–100 % Speed limit setting for Speed Mode 4.
0–100 % Speed limit setting for Speed Mode 5.
0–100 % Speed limit setting for Speed Mode 6.
0–100 % Speed limit setting for Speed Mode 7.
0–100 % Speed limit setting for Speed Mode 8.
0–100 % Speed limit setting for Speed Mode 9.
0–100 % Speed limit setting for Attendant Speed Mode 1.
0–100 % Speed limit setting for Attendant Speed Mode 2.
Rev. E
5 — PROGRAMMABLE PARAMETERS:
DESCRIPTION

Speed Mode Parameters

25