Curtis enAble 40 Manual page 19

Fig. 8b
Keypad for the
Drive + Lights handcontrol.
Curtis enAble 40 Manual,
®
Drive with Lights (8-button keypad)
This keypad's eight buttons are the standard four (On/Off, Horn, Speed Up,
Speed Down) plus a Running Lights button, two buttons for the turn indica-
tors (left and right), and a Hazard Lights button.
Running Lights Button
Pressing the Running Lights button turns on the headlamps and any other
running lights on the chair. Pressing the button again turns them off. When
the lights are on, the running lights icon in the LCD is illuminated.
Turn Indicator Buttons
The Left and Right Turn Indicator buttons activate the corresponding turn
indicators. Pressing the turn indicator button again will turn the indicator off.
Also, note that pressing the opposite turn indicator button will cancel the first
indicator and activate the new one.
The turn indicator icons in the LCD flash in synchronicity with the
actual turn indicator lights.
Hazard Lights Button
The Hazard Lights button activates the hazard lights: i.e., flashing left and
right turn signals, front and rear. They will continue to flash even if the system
is powered down. Pressing the button again turns them off.
Rev. E
3 — USER HANDCONTROL
13