Dhcp Option 60; Dhcp Option 60 Configuration; Dhcp Option For Ipv6; Supported Dhcp Option For Ipv6 - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Default 0

DHCP Option 60

DHCP option 60 is used to indicate the vendor type and configuration of a DHCP client. You can set the format for
option 60. Servers can use option 43 to return the vendor-specific information to the client.
Topic

DHCP Option 60 Configuration

DHCP Option 60 Configuration
The following table lists the parameters you can use to configure DHCP option 60.
Parameter static.network.dhcp.option60type
Description It configures the DHCP option 60 type.
0-ASCII
Permitted Values
1-Binary
Default 0
Parameter static.auto_provision.dhcp_option.option60_value
Description It configures the value (vendor class of the device) of DHCP option 60.
Permitted Values String within 99 characters
Default yealink
Web UI Settings->Auto Provision->IPv4 DHCP Option Value

DHCP Option for IPv6

The IP phone can obtain IPv6-related parameters in an IPv6 network via DHCP option.
Topics

Supported DHCP Option for IPv6

DHCP Option 59 and Custom Option
Supported DHCP Option for IPv6
The following table lists common DHCP options for IPv6 supported by Yealink IP phones.
DHCP
Parameters
Option
DNS Server 23
DNS Domain
24
Search List
SNTP Server 31
Information
32
Refresh Time
32
(RFC 3925)
Specify a list of DNS servers available to the client.
Specify a domain search list to a client.
Specify a list of Simple Network Time Protocol (SNTP) servers available to the client.
Specify an upper bound for how long a client should wait before refreshing inform-
ation retrieved from DHCPv6.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Description