Display Language - AT&T PARTNER Plus Installation And Programming Manual

Display Language

If you change the language for
extension 10, the display mes-
sages immediately start appear-
ing in the new language.
3-14 System Programming
Code: #303
Description: Sets the language on the display of a PARTNER display phone.
The language is set for each extension, so phones on the same PARTNER sys-
tem can display different languages.
Valid Entries: 1 = English
2 = Spanish
3 = French
Programming Steps:
1.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 0 ] [ 3 ]. The
display reads:
Language
Extension:
2. Enter the extension to be programmed. For example, to program exten-
sion 11, press [ 1 ] [ 1 ]. The display reads:
Language 11
1 English
To change the display language, enter the appropriate setting number as
3.
listed above. For example, to change the display messages to Spanish,
press [ 2 ]. The display reads:
Language 11
2 Spanish
To change the display language for another extension, press [ Next Item ] or [ Prev Item ] until
the extension number shows on the display. Repeat step 3.