Outgoing Call Restrictions - AT&T PARTNER Plus Installation And Programming Manual

Outgoing Call
Restrictions
While procedures that restrict
dialing are very effective, abso-
lute protection against misuse
cannot be guaranteed.
PARTNER phones give you more
protection against such misuse
than standard phones. There-
fore, we strongly recommend that
you install PARTNER phones
where restricting phone use is
important.
See appendix B for a complete
summary of dialing restrictions.
3-18 System Programming
Code: #401
Description: Restricts the types of calls an extension can make. An extension
can be restricted to inside calling only, or to local and inside calling. Outgoing
Call Restrictions apply to all lines assigned to the extension. The System Pass-
word (#403), Emergency Phone Number List (#406), Disallowed and Allowed
Phone Number Lists (#404 and #407) override Outgoing Call Restrictions.
Valid Entries: 1 =
No restriction (can make toll, local, and inside calls)
2 = Inside only (can make inside calls only)
3 = Local only (can make local outside and inside
calls only)
Programming Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 1 ]. The
display reads:
Call Restrict
Extension:
2. Enter the extension to be programmed. For example, to select extension
30, press [ 3 ] [ 0 ] . The display reads:
Call Restrict 30
1 No Restriction
3. To change the type of call restriction, enter the appropriate setting number
as listed above. For example, to restrict this extension to local and inter-
com calling, press [ 3 ] . The display reads:
Call Restrict 30
3 Local Only
To program another extension, press [ Next Item ] or [ Prev Item ] until the extension number
shows on the display. Repeat step 4.