Display Language (#303) - AT&T PARTNER II Release 3.1 Programming And Use Instructions

Display Language (#303)

Description
This System Programming procedure identifies the language in which display
messages appear if the extension has a system display phone. Tthe language is
set for each extension, so phones in the same system can display different
languages.
Considerations
If SMDR is used, the call report header is printed in the language specified for
extension 10.
Valid Entries
1 = English
2 = Spanish
3 = French
Programming
To change the Display Language setting for an extension:
Press [
1.
display reads:
Language
Extension:
Enter the number of the extension to be programmed. For example, to
2 .
program extension 11, press [
displays.
To change the display language, press [
3 .
displays.
To change the display language for another extension, press [
4 .
[
Prev Item
Step 3.
Select another procedure or exit programming mode.
5 .
5-56
Display Language (#303)
] [ ] [ ] [
Feature 0 0 System Program
] until the extension number shows on the display. Then repeat
] [ ] [ ] [
System Program # 3
] [ ]. The current display language
1 1
] until the appropriate value
Next Data
] [ ] [ ]. The
0 3
] or
Next Item