AT&T PARTNER Plus Installation And Programming Manual page 74

Programming Method B
A-2 Programming for PBX or Centrex
Considerations:
PBX or Centrex extension numbers cannot be used as System Speed Dial
numbers, Personal Speed Dial numbers, or Auto Dial numbers.
Last Number Redial and Save Number Redial will not work properly when the
"last" or "saved" number was a PBX or Centrex extension number. How-
ever, a user can dial a PBX or Centrex extension number directly.
Use when most calls are made to PBX or Centrex extensions.
1. Follow steps 1 through 3 in "Programming Method A," above.
2. Program Line Type (#202) to be "CO" for every line connected to the
the
PBX or Centrex system.
Considerations:
Outside numbers, PBX/Centrex extension numbers, and PARTNER Plus
extension numbers can be used as System Speed Dial numbers, Personal
Speed Dial numbers, and Auto Dial numbers.
To program an outside number, first program the PBX dial-out code,
then two pauses, then the number. For example, if the dial-out code
is "9," to program "555-1212" as a System Speed Dial number, enter
[ 9 ] [ H o l d ] [ H o l d ] [ 5 ] [ 5 ] [ 5 ] [ 1 ] [ 2 ] [ 1 ] [ 2 ].
To program a PBX/Centrex extension number or a PARTNER Plus exten-
sion number, do not enter [ 9 ] [ Hold ] [ Hold ] before the number.
Last Number Redial and Save Number Redial cannot be used for outside
numbers. However, they can be used for PBX/Centrex extension numbers
and PARTNER Plus extension numbers.