Copy Settings - AT&T PARTNER Plus Installation And Programming Manual

Copy Settings

Code: #399
Description: Copies the following settings from any extension to any other
extension:
#301 Line Assignment
#302 Line Use Restriction
#303 Display Language
#304 Automatic Privacy
#305 Abbreviated Ringing
#401 Outgoing Call Restrictions
#405 Disallowed List Assignment
Valid Entries:
Any valid source extension number (the extension copied from)
and any valid target extension number (the extension copied to)
Progamming Notes: This procedure is skipped in the sequence of program-
ming procedures. To use this procedure, enter the procedure code directly
(see step 1).
Programming Steps:
1. Press [Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 9 ] [ 9 ] . The
display reads:
Copy
Extension:
2. Enter the extension to copy from. For example, to copy extension 18,
press [ 1 ] [ 8 ] . The display reads:
Copy 18
Data
3. Enter the extension to copy to. Any extension except the source extension
is valid. For example, to copy to extension 22, press [ 2 ] [ 2 ] . The display
reads:
Copy 18
Data 22
To copy the same settings to another extension, enter the new extension number.
To copy another extension's settings, press [ Next Item ] or [ Prev Item ] until the extension
shows on the display. Repeat step 3.
= Factory Setting
To go to the next procedure: [ Next Proc ]
To go to the previous procedure: [ Prev Proc ]
To return data to the factory setting: [ Remove ]
#408 Allowed List Assignment
#501 Pickup Group Extensions
#502 Calling Group Extensions
#504 Night Service Group
#601 Fax Machine Extensions
Automatic Line Selection (p. 4-3)
Line Ringing Options (p. 4-4)
--
To go to a specific procedure: [ # ] [ x ] [ x ] [ x ]
(where XXX is the procedure number)
To exit system programming: [ Feature ] [ 0 ] [ 0 ]
System Programming 3-17