Disallowed List Assignment - AT&T PARTNER Plus Installation And Programming Manual

Disallowed List
Assignment
3-22 System Programming
Code: #405
Description:
After creating Disallowed Phone Number Lists (#404), use this
procedure to assign them to specific extensions. For example, you can assign
list 1 to extensions 27 and 28, and list 2 to extension 28 only.
Valid Entries: 1 = Assigned to extension
2 = Not assigned to extension
Programming Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 5 ] . The
display reads:
DisallowTo
Extension:
2. Enter the extension to be programmed. For example, to program exten-
sion 27, press [ 2 ] [ 7 ]. The display reads:
DisallowTo 27
List No:
3. Enter the list to be assigned to the extension. For example, to select list 1,
press [ 1 ]. The display reads:
DisallowTo 27 1
2 Not Assigned
4. To assign the list, press [ Next Data ] until the display reads:
DisallowTo 27 1
1 Assigned
5. To assign another list to this extension, press [ Next Item ] or [ Prev Item ] until the
list number shows on the display. Repeat step 4.
To program another extension, press [ Next Proc ] [ Prev Proc ] (or [ # ] [ 4 ] [ 0 ] [ 5 ] , and begin at
step 2.