Abbreviated Ringing - AT&T PARTNER Plus Installation And Programming Manual

Abbreviated
Ringing
Receptionists, and others who
handle many calls quickly, often
turn Abbreviated Ringing off, so
they have an audible reminder of
incoming calls.
3-16 System Programming
Code: #305
Description: Use this procedure to turn Abbreviated Ringing on or off. When a
user is on a call and Abbreviated Ringing is on (the factory setting), an incoming
call rings only once. The light next to the line button flashes until
the call is answered or the caller hangs up. This feature prevents an incoming
call from distracting a user busy on another call. To allow calls to ring repeat-
edly at a specific extension, turn Abbreviated Ringing off for that extension.
Valid Entries: 1 = Active/On (incoming calls ring once)
2 = Not active/Off (incoming calls ring repeatedly)
Programming Steps:
1.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 0 ] [ 5 ]. The
display reads
Abbrev. Ring
Extension:
2. Enter the extension to be programmed. For example, to program exten-
sion 10, press [ 1 ] [ 0 ]. The display reads:
Abbrev. Ring
1 Active
3. To turn Abbreviated Ringing off, press [ Next Data ] until the display reads:
Abbrev. Ring
2 Not Active
To program another extension, press [ Next Item ] or [ Prev Item ] until the extension number
shows on the display. Repeat step 3.
10
10