AT&T PARTNER Plus Installation And Programming Manual page 64

Personal Speed Dial
Numbers
Description: You can program up to 20 frequently dialed numbers for each
extension. The user can then dial these numbers by pressing [ Feature ] and the
2-digit code you assign the number during programming. Personal Speed Dial
numbers do not override other restrictions assigned to an extension.
Any phone number (up to 20 digits) assigned codes 80
Valid Entries:
through 99
No number assigned to any code
Considerations: You cannot program a Personal Speed Dial code onto a but-
ton.
Programming Notes: If you program emergency numbers as Personal Speed
Dial numbers, follow these guidelines when testing them:
1. Remain on the line and briefly explain to the dispatcher the reason for the
call before hanging up.
2. Perform such activities in the off-peak hours, such as early morning or late
evening.
Programming Steps:
1. Press [ Feature ][ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The
display reads:
CENTRAL TEL PROG
Extension:
2. Enter the extension to be programmed. For example, to select extension
17, press [ 1 ] [ 7 ]. The display reads:
PROGRAM EXT 17
3. Enter the 2-digit code you want to assign the phone number by pressing
[ Feature ] and 2 digits between 80 and 99. For example, to assign code 80,
press [ Feature ] [ 8 ] [ 0 ]. If a number is already assigned to the code, it
appears in the display. If no number is assigned to the code, the display
reads:
Blank
4. Enter the phone number according to the instructions given for System
Speed Dial numbers on p. 3-34.
To program another feature on this extension, go to step 3 for that feature.
= Factory Setting
To program another extension, press [ Central Tel Prog ] and continue from step 2.
To go to system programming mode, press [ Central Tel Prog ] [ System Program ].
To exit centralized telephone programming, press [ Feature ] [ [ 0 ] [ 0 ].
Centralized Telephone Programming 4-5