Maintenance - Schwinn Airdyne AD2 Service Manual

Maintenance

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is necessary to do the
necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular
maintenance is done. Worn or damaged components must be replaced immediately or the equipment removed from service
until the repair is made. Only manufacturer supplied components can be used to maintain and repair the equipment.
Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do
Daily
not use if found in this condition. Repair or replace all parts at the first sign of wear or damage.
After each workout, use a damp cloth to wipe your machine and Console free of sweat.
Note: Avoid excessive moisture on the Console.
Clean the machine to remove any dust, dirt, or grime from the surfaces. If needed, sparingly
Weekly
apply a thin coating of silicone lube to ease operation.
Note: Do not use petroleum based products.
Check pedals, crank arms and handlebars, and tighten as necessary. Make sure all bolts and
Monthly
screws are tight. Tighten as necessary.
NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free of
moisture.
Replacing the Console Batteries
The Console display will show "Batt" during power up if the battery level is low. When replacing the batteries, make sure the
batteries point in the +/– direction shown in the battery bay.
Note: The console uses AA size batteries (LR6).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.
Be sure to remove the batteries to prevent corrosion damage if you are not going to use the machine for an extended period of time.
X2
+
-
3