Maintenance - Schwinn 130/510U Service Manual

Maintenance

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is necessary to
do the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that
!
regular maintenance is done. Worn, damaged or loose components must be repaired or replaced immedi-
ately. Only manufacturer supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased
in US/Canada, contact Customer Service for replacement labels. If purchased outside US/Canada, contact
your local distributor for them.
Disconnect all power to the machine before you service it.
Daily:
Before each use, examine the exercise machine for loose, broken, damaged, or worn parts.
Do not use if found in this condition. Repair or replace all parts at the first sign of wear or
damage. Check Pedals and tighten as necessary. After each workout, use a damp cloth to wipe
your machine and Console free of moisture.
Note: Avoid excessive moisture on the Console.
NOTICE: If necessary, only use a mild dish soap with a soft cloth to clean the Console. Do not
Weekly:
Clean the machine to remove any dust, dirt, or grime from the surfaces. Check pedals and
crank arms and tighten as necessary. Check for smooth seat slider operation. If needed, apply
a very thin coating of 100% silicone lubricant to ease operation.
Note: Do not use petroleum based products.
Monthly
Make sure all bolts and screws are tight. Tighten as necessary.
or after 20 hours:
clean with a petroleum based solvent, automotive cleaner, or any product that contains
ammonia. Do not clean the Console in direct sunlight or at high temperatures. Be sure
to keep the Console free of moisture.
Silicone lubricant is not intended for human consumption. Keep out of reach of
children. Store in a safe place.
5