Maintenance - Schwinn AD2i Assembly Manual

Table of Contents

Advertisement

MAINTENANCE

Read all maintenance instructions fully before you start any repair work. In some conditions, an
assistant is necessary to do the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to
!
make sure that regular maintenance is done. Worn, damaged or loose components must be
repaired or replaced immediately. Only manufacturer supplied components can be used to
maintain and repair the equipment.
Before each use, examine the exercise machine for loose, broken, damaged,
Daily:
or worn parts. Do not use if found in this condition. Repair or replace all parts
at the first sign of wear or damage. After each workout, use a damp cloth to
wipe your machine and Console free of sweat.
Note: Avoid excessive moisture on the Console.
Clean the machine to remove any dust, dirt, or grime from the surfaces.
Weekly:
Check for smooth seat and handlebar operation. If needed, sparingly apply a
thin coating of silicone lube to ease operation.
Note: Do not use petroleum based products.
Monthly
Check pedals, crank arms and handlebars, and tighten as necessary. Make
sure all bolts and screws are tight. Tighten as necessary.
or after 20 hours:
NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to
keep the Console free of moisture.
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ad2

Table of Contents