Fan Covers - Schwinn Airdyne AD2 Service Manual

Replacing the Fan Covers
Disconnect the data cable from the console before you service this machine.
Note: Your machine may not match the image. For reference only.
To remove the Front Fan Cover:
Tools required: pedal wrench, #2 Phillips screwdriver
1. Remove the Pedals. Refer to the "Replacing the Pedals"
procedure in this manual.
2. Carefully remove the Shrouds. Refer to the "Replacing the
Shrouds and Vent Cover" procedure in this manual. Set the
hardware safely aside for reassembly.
Note: The hardware that attaches the Front Fan Cover is
removed during Shroud removal.
3. Slide the Front Fan Cover forward to disengage the tabs from
the Frame brackets. Lift slightly to disengage from the screws
inside the Frame uprights, and remove it.
4. Installation is the reverse procedure.
Note: Be sure the Frame brackets go into the tabs on the Front
Fan Cover.
19