Engine Oil And Oil Filter Change - Triumph Tiger 1200 GT 2021 Owner's Handbook Manual

Hide thumbs Also See for Tiger 1200 GT 2021:
Table of Contents

Advertisement

MAINTENANCE
126

Engine Oil and Oil Filter Change

Prolonged or repeated contact with
engine oil can lead to skin dryness,
irritation and dermatitis.
Used engine oil contains harmful
contamination that can lead to skin
cancer.
Always
wear
clothing and avoid skin contact with
used engine oil.
The engine oil may be hot.
Avoid contact with the hot engine
oil by wearing suitable protective
clothing, gloves and eye protection.
Contact with hot engine oil may cause
the skin to be scalded or burned.
The engine oil and filter must be
replaced in accordance with scheduled
maintenance requirements.
Warning
suitable
protective
Warning
Note
The sump guard must be removed
before starting this procedure, see
page 123.
1
2
1.
Engine oil filter
2.
Engine oil drain plug
To change the engine oil and engine oil
filter:
Warm up the engine thoroughly,
and then stop the engine and
secure the motorcycle in an upright
position on level ground.
Place an oil drain pan beneath the
engine.
Remove the engine oil drain plug.
Unscrew and remove the engine
oil filter using Triumph service tool
T3880313. Dispose of the old engine
oil
filter
in
friendly way.
After the engine oil has completely
drained out, fit a new sealing
washer to the drain plug. Fit and
tighten the drain plug to 25 Nm.
an
environmentally

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tiger 1200 gt pro 2021Tiger 1200 rally pro 2021Tiger 1200 gt explorer 2021Tiger 1200 rally explorer 2021

Table of Contents