The Clock And The Monitor Function Of Measurement - A&D TM-2440 Instruction Manual

8.2.2. The Clock and the Monitor Function of Measurement

The initial settings can be configured using the following methods.
The method to use switches on the recorder.
The method to use dedicated peripheral that is connected to the
recorder using the USB cable.
Procedure of operation using switches
Step 1. If the indication of the display is hidden, press the START/STOP
or EVENT switch to return to the display of waiting mode.
Step 2. If the
3 seconds or more to suspend A-BPM.
The
Step 3. While holding the START/STOP switch, press and hold the
EVENT switch for 6 seconds or more. Display will display on
the OLED display.
Step 4. Operation switches are as follows:
EVENT switch ................. Change of the current parameter.
START/STOP switch ...... Decision, next item, end of settings.
Thereafter, use these switches in another items.
Step 5. After configuring settings, press the START/STOP switch
to return to waiting mode.
Item OLED
Monitor Display
function
Clock
Year
Year
Clock
Month
Mon.
Clock
Day
Day
mark is shown, press and hold the EVENT switch for
mark turns off.
xx = OFF, ON
xx
xx = 17 to 99.
xx
xx = 1 to 12 month
xx
xx = 1 to 31 day
xx
Range
36
Last two digits of year.