A&D TM-2440 Instruction Manual page 58

: When the sleep mode is set to "ON", A-BPM is used the Start time
#1
and Operation time of the automated measurement. The Interval
time of these sections (1 to 6) cannot use.
: When sleep mode is set to "OFF", the Interval time is not displayed.
#2
#3 : Example for automated measurement.
Start time :
Operation time :
Response :
#4 : Example for automated measurement.
Start time :
Operation time :
Response :
The content of the item
Sleep mode :
The Interval time for the automated measurement can be specified.
The Interval time of section 1 to 6 cannot use. Refer to "6.1.2 Sleep
Function and Interval time".
Section :
24 hours can be separated to six sections in maximum. Each section
can specify the Start time and Interval. A-BPM can use only while
the automated measurement can be performed.
Automated measurement :
The whole of A-BPM can be controlled. Specify the Start time and
Operation time. Refer to "8.3.2. A-BPM Program Examples".
Stores a time. (0 to 23 hour)
Set to "OFF"
A-BPM starts the blood pressure measurement
at the preset Start time and continues until
A-BPM is suspended.
Set to "OFF"
Stores time to be continued. (1 to 27 hours)
A-BPM starts blood pressure measurement
and stops after the Operation time.
40