Initial Pressurization Value; A-Bpm Preset Programs - A&D TM-2440 Instruction Manual

Clock
Hour
Hour
Clock
Minute
Min.
Enclosed characters : Factory settings and initial settings when
batteries are consumed completely.

8.2.3. Initial Pressurization Value

The initial pressurization value is set to 180 mmHg at the factory.

8.3. A-BPM Preset Programs

The initial settings can be configured using the following methods.
The method to use switches on the recorder.
The method to use dedicated peripheral that is connected to the
recorder using the USB cable.
A-BPM can use only while the automated measurement can be
performed.
Procedure of operation using switches
Step 1. If the indication of the display is hidden, press the START/STOP
or EVENT switch to return to the display of waiting mode.
Step 2. If the
3 seconds or more to suspend A-BPM.
The
Step 3. While holding START/STOP switch, press and hold the
EVENT switch for 3 seconds or more. Sleep will display on
the OLED display.
xx = 0 to 23 hour
xx
xx = 0 to 59 minutes
xx
mark is shown, press and hold the EVENT switch for
mark turns off.
37