A&D TM-2440 Instruction Manual page 74

Recorder for ambulatory blood pressure monitor

Hide thumbs Also See for TM-2440:

Table of Contents

To start data communication with dedicated peripheral

Step 1. Connect the micro USB cable between the recorder and

dedicated peripheral.

Step 2. The buzzer will sound and the following symbol appears on

the OLED display.

The state of data communication enters standby mode.

Standby mode

Step 3. Carry out analysis using the dedicated peripheral.

The state of data communication only enters active online mode

during USB communication.

Active online mode

To stop data communication with dedicated peripheral

Step 1. Remove the cable in the standby mode.

Table of Contents

Show Quick Links

Table of Contents