Using The Monitor - A&D LifeSource Essential UA-651CNBLE Instruction Manual

Using the Monitor

Installing/Changing the batteries
1. Remove the battery cover.
2. Remove the used batteries from
the battery compartment when
changing them.
3. Insert new batteries or replace
used batteries as shown, taking
care that the polarities (+) and (-)
are correct.
4. Replace the battery cover. Use only R6P, LR6 or AA batteries.
CAUTION
• Insert the batteries as shown in the battery compartment. If installed
incorrectly, the device will not work.
• When (blinks on the display and the device indicates that the
battery needs to be replaced, replace all batteries with new ones.
Do not mix old and new batteries. It may shorten the battery life, or
cause the device to malfunction. Replace the batteries two seconds
or more after the device turns off.
• If does not appear, then the batteries are completely drained.
• The battery life varies with the ambient temperature and may be
shorter at low temperatures. Generally, four new LR6 batteries will
last approximately for one year when used twice for measurement
each day.
• Use the specified batteries only. The batteries provided with the
device are for testing the device performance and may have a limited
life.
• Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
E-9
Step 4
Step 2
Step 1
Step 3