To adjust the clock.
To set the monitor function of A-BPM.
Step 1. If the indication of the display is hidden, press the
START/STOP or EVENT switch to return to the display of
waiting mode.
Step 2. If the
3 seconds or more to suspend A-BPM.
Step 3. While pressing and holding the START/STOP switch,
press and hold the EVENT switch for 6 seconds or more.
Display is displayed on the OLED display.
Step 4. Operation switches are as follows:
Refer to "8.2.2. The Clock and the Monitor Function of Measurement"
EVENT switch ................. Change the current parameter.
START/STOP switch ...... Decision, next item, end of settings.
mark is shown, press and hold the EVENT switch for
19