Placing A Three-Way Conference Call; Changing The Screen Contrast; Setting The Screen Backlight Timer - Cisco SPA504 User Manual

Placing a Three-Way Conference Call

To initiate a conference call:
STEP 1 Press Confrn during an active call. The first call is placed on hold, a second line is opened,
and you hear a dial tone.
STEP 2 Dial the second person's telephone number.
STEP 3 Press Confrn again. All three parties are connected in the conference call. When you hang
up, the other two parties are disconnected. To keep the other parties in a call, but disconnect
yourself from the call, press Join (if available on your phone system).
Customising Your IP Phone Screen
You can customise your IP phone screen.

Changing the Screen Contrast

To adjust the contrast of the IP phone screen:
STEP 1 Press the Setup button.
STEP 2 Scroll to User Preferences and press Select.
STEP 3 Scroll to Screen Preferences and press Select.
STEP 4 Scroll to Display Brightness. The default contrast is 15. Enter a number between 1 (lowest)
and 15 (greatest) to change the contrast.
STEP 5 Press Save.

Setting the Screen Backlight Timer

You can set a timer for your screen so that your IP phone screen becomes dark after a specified time
when the phone is idle.
STEP 1 Press the Setup button.
STEP 2 Scroll to Preferences and press Select.
STEP 3 Scroll to Back Light Timer and press Edit.
STEP 4 Press option until the desired time is reached.
STEP 5 Press OK, then Press Save.
www.optimumconnect.co.uk
www.datasharp.co.uk