Connect To Water And Electrical Supply - Fisher & Paykel ACTIVESMART RS9120W Installation Manual

Connecting to the power outlet
At the back of your refrigerator, connect the refrigerator to the electrical
1
supply (230VAC, 50Hz) with the fitted plug and lead, and turn on.
Ensure the refrigerator is connected to its own isolating switch (A).
B
!4

CONNECT TO WATER AND ELECTRICAL SUPPLY

A
IMPORTANT!
Follow the steps below to avoid running over the hose that can cause
damage and possible water leaks.
WARNING!
Failure to follow this instruction can lead to serious injury or death.
Pushing the refrigerator into the correct position:
2
Stop midway, reach through base to locate power cord. Pull power cord
● ●
through the front left side of the refrigerator (B), tucking it neatly in the
left side of the base (C).
Reach through base to locate water line hose coil. Tuck coil neatly into
● ●
front right side of base (D).
Push the refrigerator until the doors are in line with the frame.
● ●
Ensure refrigerator is centered.
Firm contact must be achieved between the refrigerator and anti-tip
● ●
bracket, min. 60mm overlap (E).
min. 60mm
overlap
E
C
D
Final location Final location
of power cord, of water tube,
left side of base right side of base
19