WARNING!
Be careful when working with the refrigerator outside of the finished enclosure. Ensure that the refrigerator
is secured to prevent tipping forward. Tipping of refrigerator can lead to serious injury or death.
Ensure all external packaging material is removed from the refrigerator before installation.
1
On the right side of the top trim, insert M5 nuts x2 onto the top and bottom slide.
2
Slide nuts towards the centre of the trim, 330mm.
Repeat this process on the opposite side.
Position joining brackets over the M5 nuts. Thread screws x2 (M5x8 pan head
3
Phillips screws) through bracket hole and secure.
Repeat this process on the opposite side.
16
!2
ATTACH TOP TRIM (FOR 2134mm CAVITY HEIGHT)
A
At the top of the refrigerator, place the assembled top trim behind the existing
4
refrigerator trim. Bring the top trim forward and insert screw heads through
the key holes of the joining brackets (A).
B
Slide the screws located on the refrigerator sideways towards the
5
narrow side of the key holes on the joining bracket, and tighten
screws to lock top trim in position (B).