Connect To Water And Electrical Supply - Fisher & Paykel ACTIVESMART RS36A72 Installation Manuals

IMPORTANT!
Ensure water tubing is routed away from any sharp objects, sharp corners, and not in a location where it can be kinked or squashed.
● ●
Beware of kinking the tube as this will stop water flow.
Ensure a firm contact is observed as the refrigerator engages the anti-tip bracket, 2 3/8" min. (60mm) overlap.
● ●
Move the refrigerator in front of the cabinetry close enough to allow access behind
4
for power and water connections.
At the back of the refrigerator, cut the water tube to a suitable length for connecting
to the water outlet. Ensure there is enough tubing to pull the refrigerator out for
service, if required.
Assemble the following water fittings onto the other end of the water tube.
5
Insert tube Compression Compression
sleeve
Final water tube connection
NOTE:
If using a braided water line hose (not
supplied), connect an adaptor to one
end of the hose before inserting into
the PRV.
Fasten the faucet connection to the cold water supply. Take care not
6
to over-tighten the faucet connection. Turn isolating faucet on and
check that all connections are dry and free of drips.
Connecting power
7
Attach the power cord clip to the back of your refrigerator
● ●
Connect the refrigerator to the electrical supply (115VAC, 60Hz
● ●
with the fitted plug and lead, and turn on. Ensure the refrigerator
is connected to its own isolating switch.
Ensure excess power cord length is secured onto the clip (D).
● ●
When pushing the refrigerator into position, take care not to roll
● ●
over or damage the power cord and/or water tubing.
!2

CONNECT TO WATER AND ELECTRICAL SUPPLY

Water tube
nut
D
17