Fisher & Paykel ACTIVESMART RS9120W Installation Manual page 23

IMPORTANT!
The water filter head must be firmly pushed into the product and secured. incorrect installation can lead to water leaks.
● ●
Installing the water filter
Pull the freezer drawer out slightly and insert the filter into the casing at the bottom
1
left corner of the refrigerator. Ensure the filter handle is positioned vertically (A).
Push the cartridge firmly inside the casing all the way into the filter head.
2
A
FRONT VIEW
Align the filter removal tool over the filter handle and turn
3
90° clockwise to tighten (B). Remove filter removal tool
and close the freezer drawer.
Flushing the water filter
Before turning on your automatic ice maker, the water filter must be flushed to remove
4
any impurities or trapped air in the water tank and filter system. Refer to the user
guide 'Operating instructions — Automatic ice maker' for more information.
!6 INSTALL WATER FILTER AND TOE KICK GRILLE
B
Filter in locked position
Installing the toe kick filter and grille
Remove filter from inside the product. Fit the filter onto the
5
rails and push to the rear until it clips securely (C).
C
Ensure the top grille is inserted in the correct orientation (D).
6
Align the top grille clips to the top plinth slots then firmly push
grille onto refrigerator until the clips engage (E).
D
E
21