Table of Contents
Advertisement
Water fittings kit
Collet locking clip (1)
1/2 BSP Stainless steel
braided hose with
adaptor (1)
6.35mm Adaptor (2)
38
CONNECT WATER AND POWER SUPPLY
A
B
Connecting to water supply
1 Roll the appliance to the front of the cabinetry close enough to
allow access at the back for power and water connection.
2 Insert the adaptor end of the braided hose through a hole at
the rear of the plinth (A) and push all the way to the front
of the appliance.
3 Connect one end of the braided water hose to the water tap (B).
Flush water through the hose prior to connection to the appliance
z
to remove any debris in the hose.
4 Pull the hose from the front of the appliance and connect
an adaptor (C).
C
Advertisement
Table of Contents
