Ieee-488.2 Common Command Quick Reference; Ieee 488.2 Common Command Quick Reference - HP E1328A User Manual

IEEE-488.2 Common Command Quick Reference

Command
*IDN? Identification Query
*RST Reset
*TST? Self-Test Query
*OPC Operation Complete
*OPC? Operation Complete Query
*WAI Wait to Complete
*CLS Clear Status Register
*ESE Event Status Enable
*ESE?
Event Status Enable Query
*ESR? Event Status Register Query
*SRE Service Request Enable
*SRE? Service Request Enable
Query
*STB? Read Status Byte Query
*RCL <n> Recall Saved State
*SAV <n> Save State
Note
50 HP E1328A Command Reference
The following table lists the IEEE 488.2 Common (*) Commands that can be
executed by the D/A Converter Module. For more information on Common
Commands, refer to the HP E1300A/E1301A User's Manual, the HP E1406A
Command Module User's Manual, or the ANSI/IEEE Standard 488.2-1987.
Title
Returns Identification String of the D/A Converter.
Performs a 5-second self-test, places 0Vdc/0mAdc on all channels,
and then sets the mode of all channels calibrated (ON).
Returns 0 unless self-test fails.
(See note below).
Returns a 1 if previous operation is complete.
(See note below).
Clears all Status Register (see SYSTem:ERRor?).
(See note below).
(See note below).
(See note below).
(See note below).
(See note below).
(See note below).
Recalls previously stored D/A Converter Module configuration.
n
< > indicates location in memory from 0 to 9.
Stores the current D/A Converter Module configuration in memory.
n
< > indicates location in memory from 0 to 9.
These commands have little or no effect on D/A Converter operation. Refer to the
HP E1300A/E1301A Mainframe User's Manual, the HP E1406A Command Module
User's Manual, or the ANSI/IEEE Standard 488.2-1987 for more information.
Description
Chapter 5