Linking
Commands
SCPI Command Reference
Chapter 5
Linking IEEE 488.2 Common Commands with SCPI Commands. Use a
semicolon (;) between the commands. For example:
*RST;VOLT1?
Linking Multiple SCPI Commands. Use both a semicolon (;) and a
colon (:) between the commands. For example:
VOLT1?;:CURR2?
The following sections describe the Standard Commands for Programmable
Instruments (SCPI) commands for the HP E1328A 4-Channel D/A Converter
Module. Commands are listed alphabetically by subsystem and within each
subsystem. A command guide is printed in the top margin of each page. The guide
indicates the current subsystem on that page.
HP E1328A Command Reference
41