Display:monitor:channel; Display:monitor[:State]; Display:monitor:string - HP E1328A User Manual

DISPlay:MONitor:CHANnel?

DISPlay:MONitor[:STATe]

Parameters
Comments
Example

DISPlay:MONitor:STRing?

46 HP E1328A Command Reference
DISPlay:MONitor:CHANnel? <
dependent on if the parameter (
If <channel> is not used (blank): queries which channel will be displayed when the
monitor mode is enabled.
channel changed). 1 through
If <channel> is used (
DEF | MIN | MAX
and always returns
DEFault MINimum
DISPlay:MONitor[:STATe] <
Parameter Name
< mode >
•
The parameter is optional. Therefore, either of the following command
[:STATe]
statements is valid:
DISP:MON:STAT ON
•
Monitoring Module Channels:
DISPlay:MONitor:STATe 1
channel state.
DISPlay:MONitor:STATe OFF
the monitor mode off.
•
Selecting the Channel to be Monitored: Use the
command to select the channel.
•
*RST Condition: DISPlay:MONitor[:STATe] OFF
Enabling the Monitor Mode.
This command selects monitor mode to on.
DISP:MON:STAT 1
DISPlay:MONitor:STRing?
selected by the DISPlay:MONitor:CHANnel
DISPlay:MONitor[:STATe]
separated by a comma.
channel > performs two different functions
channel ) is used.
< >
-1 indicates operating in automatic mode (displays the last
4 indicates which specific channel will be displayed.
): queries available channel information.
1 , and
MAXimum
mode > turns the monitor mode on or off.
Parameter Type Range of Values
boolean 0 | 1 | ON | OFF
or
DISP:MON ON
DISPlay:MONitor:STATe ON
turns the monitor mode on to show the selected
or
queries the channel for output information. Channel is
command, and enabled by the
command. Display string is two 25-character fields
always returns 4 .
Default Values
0 | OFF
or
DISPlay:MONitor:STATe 0
DISPlay:MONitor:CHANnel
Chapter 5
turns