Quantum DXi4510 User Manual page 236

Chapter 9: DXi4000 Configuration
Notifications
212
Note: When entering IP addresses, never use an address that
is in a reserved IP address range. To see a list of
reserved IP address ranges, click the quick tip icon [?]
located near the IP address field.
Note: To use hostname format, you must specify at least one
DNS IP address on the Network page (see
page 176).
• Name - Enter the name of the destination.
3 Select one or more traps to send to the destination:
• Failure - Sends failure traps.
• Warning - Sends warning traps.
• Informational - Sends informational traps.
• Available - Sends a trap when the system transitions from an
unavailable to an available state.
• Unavailable - Sends a trap when the system transitions from an
available to an unavailable state.
4 Click Apply.
Editing a Destination
Edit an SNMP destination to change the name of the destination or the
types of traps the DXi4000 sends to the destination.
To edit a destination:
1 Click Edit.
The Edit Trap Destination page displays (see
Network
Figure 116).
Quantum DXi4000 User's Guide
on