Advanced Setting - Quantum DXi4510 User Manual

Advanced Setting

Quantum DXi4000 User's Guide
To delete a workgroup user or share administrator, select the user or
administrator and click Delete.
Note: You can select multiple users or administrators to delete at
once.
ADS Share Permissions
To manage user access to CIFS shares when the DXi4000 is joined to a
Windows domain, use the MMC (Microsoft Management Console). Log
onto the MMC on the domain controller and access a share's properties
to set share permissions for users.
Note: In some cases, when you view file permissions on a Windows
system, you will not see the user and group information.
Instead you will see the SID (security ID) which appears as a
series of numbers. This occurs when you move files (for
example, using a backup utility or DOS xcopy) from one system
to another system, and the user and group from the source
system do not exist on the target system.

Often users and groups are unique to a particular scope, such
as a Windows system or an ADS domain. As a result, some
assigned permissions might not be available on the target
system because the associated user and group do not exist
there. However, common groups (for example,
Administrators, Users, and Everyone) are recognized on most
Windows systems and domains.
The Advanced Setting page allows you to enable or disable advanced
SMB settings.
To access the Advanced Setting page, on the NAS page, click the
Advanced Setting tab (see
Chapter 9: DXi4000 Configuration
Figure 87).
NAS
153