Quantum DXi4510 User Manual page 170

Chapter 9: DXi4000 Configuration
NAS
146
(ADS) server (see Date & Time
between the DXi4000 and the ADS server (domain controller) must be
less than 300 seconds. Quantum recommends using the same NTP
server for the DXi4000 and the ADS server to keep them synchronized.
To join a Windows domain:
1 Enter the following information about the Windows domain:
• Domain Type - Select Active Directory.
• Domain/Workgroup Name - Enter the domain name.
• Primary Domain Controller - Select an option for the Primary
Domain Controller (PDC):
• Use DNS Discovery - Discover the PDC automatically.
• Specify Address - Enter the fully qualified name or the IP
address of the PDC.
• Organization Unit - (Optional) Enter the name of the
organizational unit in the domain.
The DXi4000 will become a member of this organization.
• Administrator Name - Enter Administrator or any user that
has the right to join the domain.
By default, any user belonging to the Administrators group or
the Domain Admins group has the right to join the domain. In
addition, any user can join the domain if they are specifically
delegated this right by a member of the Administrators group.
• Administrator Password - Enter the password for the user
entered above.
2 Click Apply.
Note: When the system is joined to the Active Directory domain,
share security is managed by the MMC (Microsoft Management
Console) that is running on the domain controller. By default,
when a CIFS share is created, the default security setting allows
access for all users. Any access restrictions on individual users
must be managed from the MMC.
on page 190). The time difference
Quantum DXi4000 User's Guide