Quantum DXi4510 User Manual page 203

Quantum DXi4000 User's Guide
Caution: Specifying a default gateway is required to enable
connectivity with all subnets other than those that
the DXi4000 is directly connected to. For example,
if the DXi4000 and its clients are on different
subnets, you must specify a default gateway.
• Domain Suffix Search List - (Optional) The local domain to
search first when resolving domain names.
The domain suffix is a single domain name. The domain name
may contain only letters (A–Z), numbers (0–9), dots (.), and
hyphens (-).
• Primary, Secondary, and Tertiary DNS IP Address - (Optional)
The IP address of up to three DNS servers used to resolve
domain names and translate them into IP addresses.
Note: You must specify a DNS IP address if you plan to use
hostname format when configuring an NTP time server,
outgoing e-mail server, replication sources and targets,
and other information.
Note: The Domain Suffix Search List and DNS IP Addresses
cannot be modified if the DXi4000 is currently joined to a
Windows domain. To disjoin a Windows domain, see
Windows Domain
3 Under Network Interfaces, select the type of Ethernet ports to use
for the bonded interface:
• BOND ALL 1GB - Use the 1GbE Ethernet ports for all traffic
types.
Note: The grid displays a graphical representation of the Ethernet
as they appear on the rear of the system. Ports that are
bonded together in an interface are shaded the same color.
4 Under Bonding, select the bonding mode:
Chapter 9: DXi4000 Configuration
on page 144.
System
179